spacer

Australian Water Association Member

Water Industry Operators Association

 


EDS Pump Station Managers

PDF Manual Click Here For a Printable PSM-02 Pump Station Manager Brochure

PDF Manual PSM Concept of Operation Brochure

Pump Station Manager

The Pump Station Manager (PSM) is an innovative, compact, user friendly computerised flowmeter and pump station management system, designed for the monitoring of universal pumping stations and wet-well applications.

The PSM offers accurate measurement of inflow, outflow, flow totalisation, pump hours run and number of starts. The PSM simplistic design ensures a cost effective pump management system.

The conceptual operation of the PSM uses volt free contacts from the existing pump motor start contacts or control circuits, thus eliminating the need for calibration. The calculates known pumping capacities or in wet-well applications, calculates the wet-well volumes for flow measurement. This simplistic principle of operation provides accurate flow measurement.

Maintenance requirements are nil and in waste water applications, the PSM is not affected by problems with fouling and grease build up, encountered with other flow meters.

The PSM monitors the run state of each pump and provides two independent alarm relay outputs. Interfacing of the digital input and output status is via the Monitor A plug/socket connection.

The PSM provides additional analogue monitoring inputs. Such parameters as, motor current monitoring, pressure monitoring and level monitoring etc, can be configured to provide interactive reporting in the Pump Station Manager. Each input (up to 4) can be scaled in engineering units and defined in the set-up procedure. Monitoring of analogue status such as motor currents, pressure, level etc.

Maintenance requirements are nil and in waste water applications, the PSM is not affected by problems with fouling and grease build up, encountered with other flow meters.

The PSM-02 Pump Station Manager is supplied with software PMS-2000 for Windows 95, 98, 2000 or better operating system, RS232 serial communications cable, Digital Input cable, 220-110VAC/9VDC plug pack, and Operational Handbook. The unit is fitted modem interface port as standard.

Please Click Here For Product Enquiry Form

 

Click Item for Product Details

About EDS : Contact EDS : Technical Drawings : EMS 003D Data Logger : EMS 004D Data Logger : EMS 005D Data Logger
EMS 005DBM Data Logger : EMS 050D Data Logger : EMS 050DE Data Logger : EMS 400 Data Logger : EMS Software
EPM 99 Pressure Monitor : Marsh McBirney FLO-DAR : Marsh McBirney FLO-MATE : EASTECH VANTAGE 4000 Series
Marsh McBirney FLO-SYSTEM
: Marsh McBirney FLO-TOTE3 : Internet Data Acquisition
McCrometer MULTI_MAG : McCrometer SINGLE-MAG : McCrometer ULTRA-MAG : Marsh McBirney Software
Pump Station Manager : Remote Flow Station : EDS Services : WHAM02 Water Hammer Monitor