Detectronic Flow Meters & Level Monitors in Australia

Detectronic specialises in sewer and wastewater network monitoring: measuring, recording, reporting and reacting to depth and flow.

It designs and makes ultrasonic flow, level and water quality instruments for sewers, wastewater systems and trade waste.

Its flow meters support early flood detection, I&I assessment, combined sewer overflow (CSO) monitoring and smart sewer networks, in short studies and long-term programs.

We supply and install Detectronic instruments across Australia and run them in our own fleet, so the advice comes from people who install them.

Across the range

Every instrument here is ATEX and IECEx certified for Zone 0, the most hazardous classification, and built for the sewer.

MSFM S2.5T flow meterVelocity 0.03 to 4.00 m/s and depth to 3.5 m, logging every 1 to 60 minutes. More than 15 weeks on one battery at 2-minute logging. Can pulse a sampler for flow-proportional sampling.

LIDoTT SensorUltrasonic level to 1.5 m, accurate to ± 2 mm. Switches to pressure, up to 10 m, when the chamber surcharges.

LIDoTT RRadar level to 7 m, accurate to ± 5 mm, with pressure to 10 m: up to 17 m in total with zero deadband.

LIDoTT Smart loggerLogs every 2 to 15 minutes and reports every 5 minutes to 24 hours over 4G LTE-M1 or NB-IoT. Battery life of up to seven years.

Alarm2Radar level from 0 to 20 m with no deadband. High and low, rate of change and profile alarms. Typical battery life of five years or more.

LIDoTT AlarmSensor, battery, modem and antenna in one device, measuring to 8.4 m with three alarm states.