1300 721 683 Contact us

Water Quality Monitoring

pH, EC, turbidity and nutrient monitoring for wastewater, process water and the environment, from one sensor to a whole network.

Start an enquiry

At a glance

  • pH, EC and turbiditySensors made by EDS
  • Up to seven parametersAt once, with the iLab 901 multi-parameter sensor
  • Nitrate and nitriteAquamonitrix, from one sample, with no pre-treatment
  • 600 samples between servicesOver three months at six samples a day

We’ve measured water quality for the wastewater industry since we began, and it’s still a big part of what we do. From one EC point to thousands of instruments reporting in real time, we supply, install and look after the equipment.

We make our own pH, EC and turbidity sensors and the iLab multi-parameter range, and we represent Aquamonitrix for real-time nitrate and nitrite. Readings go straight to FlowSense, or to your own SCADA or telemetry system.

The circular clarifier of a wastewater treatment plant on a clear day, with its scraper bridge and weir
A treatment plant clarifier. We monitor quality from the inlet to the effluent, and in the network and environment around it.

What we measure

pH, EC and turbidityEDS-made sensors for continuous measurement in water and wastewater.
Several parameters at onceThe iLab 901 measures up to seven at once, from a list including pH, ORP, conductivity, turbidity, dissolved oxygen, ammonia and nitrate. The handheld iLab Sonde covers field checks.
Nitrate and nitriteAquamonitrix measures both from one sample, with no pre-treatment. Detection limits are 1.5 ppm nitrate and 0.25 ppm nitrite.
Flow and quality togetherOne program can cover both, as EDS has done for the wastewater industry for decades.

Where it is used

  • Wastewater networks and treatment processes
  • Raw, process and effluent water
  • Trade waste discharges
  • Rivers, stormwater and surface water
  • Baseline, impact and compliance monitoring for projects

Built for long deployments

  • Readings where you need them

    Continuous readings to SCADA, telemetry or a building management system, as well as to EDS FlowSense.

  • Few site visits

    Aquamonitrix runs more than 600 samples between services: over three months at six a day. The iLab 901 cleans itself.

  • Sensors that stay clear in a sewer

    Sensor Fort, designed and built by EDS, holds pH, EC and other sensors on the bottom of a gravity sewer with only their tips in the flow, so rag has nothing to catch.

  • Up and running quickly

    Aquamonitrix can be running within a couple of hours, and its calibration stays stable over long deployments.

  • Calibrated in place

    We audit and calibrate analytical equipment on site, so the readings stay trustworthy.

Talk to the people who measure it.

Tell us about your network, site or project. A real person from our team will come back to you.

Start an enquiry 1300 721 683